Mataway Overseeder |
Engine |
4-cycle Honda GX-390; recoil start; on/off switch; low-oil alert |
Displacement |
23.7 cu. in. (389 cc) |
Fuel Capacity |
1.6 gal (6.1 L) |
Oil Capacity |
1.16 qt. (1.1 L) |
Clutch |
Spring-loaded belt tightener |
Primary Drive |
4L-section V-belt to front wheels by gear box and sealed roller chain; triple 3V-section V-belts from engine to reel |
Lubrication |
Oil splash in gear case; pressure grease fittings elsewhere |
Cutting Depth |
Adjustable to any desired depth up to 1.5 in (38 mm) |
| Seeding/Slicing Width
|
19 in. (483 mm)
|
Front Tires |
two 10.4 x 4.10-4, 2-ply, pneumatic; knob tread |
Rear Tires |
two 10.25 x 4.10-4, 2-ply, pneumatic; sawtooth tread |
|
|
|
Optional Vertical Slicer/Dethatcher Reels
|
Flail-Type Blade |
1/8 in. (3mm) at 1 in. (25 mm) spacing |
Fixed-Type Blade |
1/32 in. (1 mm) at 1/2 in. (13 mm) spacing; 1/32 in. (1 mm) at 1 in. (25 mm) spacing; 1/16 in. (2 mm) at 1 in. ( 25 mm) spacing; 1/16 in. (2 mm) at 1-1/2 in. (38 mm) spacing |
|
|
|
Hopper
|
Capacity |
0.83 cu. ft. (0.02 cu. m) |
Configuration |
Rectangular top with side tapering down to feed rotor bar |
Size |
8.5 in. W x 18.5 in. L x 13 in. H (216 x 470 x 330 mm) |
Seed Density |
Fully adjustable for all types of common grass seed |
|
|
Rotor Bar and Metering System
|
Metering System |
Stainless-steel plates with triangular holes slide over each other to create a variable opening |
Rotor Bar |
Neoprene rubber |
Seed-Flow Control |
Rotor bar stop; gate shutoff |
Rotar Bar Drive |
Direct drive powered by front-wheel-drive unit |
| Rotar Bar Operation
|
Engages lowered-reel position only
|
Seed Gate Operation |
Automatically shuts off when unit is raised |
Maintenance |
Rotor bar and metering device remove easily for servicing |
|
|
Lower Seed Delivery System
|
|
Seed Tubes |
Clear Plastic |
Seed Outlets |
10 at 2 in. (51 mm) spacing |
Discs |
10 high-carbon, heat-treated disc blades with scrapers |
| Detachable |
Four removable pins attach disc assembly to Mataway |
Slicing Reel |
Hardened, 1 in. (25 mm) hex shaft |
Fixed Blades |
10 8-point, high-carbon, heat-treated blades designed for slicing and longer wear life; spaced 2 in. (51 mm) centers |
| |
Dimensions
|
Width |
35.5 in. (902 mm) |
Length |
50 in. (1,277 mm) |
Height |
44 in. (1,118 mm) |
Weight |
453 lbs (205 kg) without reel |